Find Information About Lots of Great Topics

Tippmann 98 Custom is a semi-automatic paintball gun with an open-bolt inline and blowback system. It is also known as 98C, 98 Custom or 98. It is quite popular for the newcomers of the sport because of its ease of use and reliability.

This paintball gun is made from die cast aluminum giving the 98 a durable stock. It is compatible with compressed air, nitrogen and carbon dioxide making it adaptable to any weather conditions. Weighing 2.9 lbs without the tank and a barrel of 8.5 inches, this paintball is quite heavier and longer compared to most guns.

For the ball propulsion, most people would use carbon dioxide as it is cheaper compared with the compressed air. Compressed air is more expensive because of the upfront cost of the compressed bottles. When using CO2, use the 20 oz tank to provide you more shots.

As you may know, the 98 Custom is equipped with a $5 hopper which is good enough for rental purposes or for newbies. But as an experienced player of the sport, you may want to upgrade it to a motorized hopper to give you a high rate of fire. Using motorized hopper also can lessen the chances of jams of broken or chopped paintballs.

The $5 hopper of the 98 Custom is good enough for the newbies of the sport, as well as for rental purposes. But as an experienced player, upgrading it to a motorized hopper can give you a high rate of fire, making it more fun to use. Using motorized hopper also can lessen the chances of jams of broken or chopped paintballs. Make sure you are using a reliable quality paintballs. Paintballs with thinner shells break easily and is prone to cause your gun jams.

Always clean your gun after the game. Although the 98 Custom can hold a significant amount of dirt and paint, cleaning your gun will help it function better. You can remove all the paintballs and the release the air after the game. Remove the barrel and clean it using a pull-through towel or sponge. Remove also the feed neck and clean it using a warm, running water and then dry it with a towel. If there are broken paintballs, remove it using a spray bottle. You need this too to remove dirt and paint in the breech area. The outer receiver can also be sprayed clean and wiped dry. While cleaning, you can also check if the ball latch is still intact. It is the orange device in the breech that controls the feed of the paintballs, preventing more that 1 ball to enter the barrel.

Dismantling the gun for further cleaning is also essential. It can be done once every few months. In doing so, you have ensure that the front sight spring is still there, as well as the other springs and pins in the trigger when you putting it back. Exposing the internal part of the gun enables you to clean them as well. The rear bolt can be wiped clean with a wet cloth then oiled. The o-ring on the other hand can be replaced as necessary, as well as the ball latch. When disassembling the 98C, the valve should be left it its place as repeatedly removing its bolts can cause its premature malfunction.

Once you are done cleaning, lubricate it and it is now ready to be used again. Remember, do not use any other oil. There is a special paintball gun oil that you should use for lubricating your gun. Some lubricants may not be compatible with CO2 and using them may cause the marker to malfunction.

Your favorite sport is paintball and in order to fulfill this game, you need tippmann 98 custom to help you pin down your opponent. Certainly, you will need regular maintenance to take good care of this equipment. You can also try spyder mr1.

Popularity: unranked [?]